Sydney Harbour Bridge Cardboard Construction Model Kit | Makedo Compatible

Note: Makedo Tools and Screws are NOT included with this product.

Tools and screws are available separately.

There are two variations of this bridge:

1. The smaller 44 cm long bridge (2 cardboard sheets)

2. The larger 52 cm long bridge (3 cardboard sheets)

This Sydney Harbour Bridge laser cut cardboard construction model kit is compatible with the cardboard construction system from Makedo.

This Bridge is suitable for ages 8 and up.

It requires a total of 38 short scu's to construct it.

Instructions:

Assembly Instructions

1. Carefully poke out all the screw holes, all the triangles and the rectangles on the sides and tops of the bridge.

2. Pop out the two top sections of the bridge and fold the tabs down (use a ruler)

3. Pop out the two sides of the bridge and screw the arches to the top section.

4. Pop out the road way and fold all the sides downwards (use a ruler).

Screw the lower part of the bridge onto the road way.

5. Pop out one of the pylons and fold along the lines to form into its final shape.

Screw the pylon together with two screws.

6. Attach it to the bridge by screwing it in from the underside of the bridge.

7. Repeat for the other three pylons.

Included in this set:

1. 44cm bridge composed of two cardboard sheets OR 52cm bridge composed of 3 cardboard sheets

2. Downloadable pdf Instruction Sheet

Upon purchase you will receive an email link to download an instruction sheet.

Note: Makedo Tools and Scru's NOT included.